Pelco C690M-E operation manual RJ-45 Color Chart, Straight-Through Cable, Crossed Cable

9. Connect a PC.

•If a PC will be connected directly to the DVR, connect it at the Ethernet port on the rear of the DVR using a T568A/B cross-over shielded CAT5 cable with shielded RJ-45 connectors (not supplied). The maximum length is 328 feet (100 m).

Refer to the charts below:

	RJ-45 Color Chart
Wire 1	White with an orange stripe
Wire 2	Orange
Wire 3	White with a green stripe
Wire 4	Blue
Wire 5	White with a blue stripe
Wire 6	Green
Wire 7	White with a brown stripe
Wire 8	Brown

Straight-Through Cable

Wire Becomes

11

22

33

66

Crossed Cable

Wire Becomes

13

26

31

62

Figure 5. RJ-45 Color and Straight/Crossed Cable Pin-Outs Charts

•If the PC will be communicating with the DVR through an external modem rather than over a network, connect a Pelco DX7000EM External Modem to the DVR’s COM 1 port. Connect the modem to a phone jack. This will let you dial up the DVR to configure the unit or view live and recorded video. Response will be a little slower than over a network.

•If connecting to a network, go to step 11.

10.Configure the PC. Refer to the Configuring Your PC section.

16 Pelco Manual C690M-E (11/04)