Pelco C690M-E operation manual Operating Presets, Programming Patterns, Operating Patterns

OPERATING PRESETS

1.On the Live Video screen, click the button of the camera you want to control.

2.Using the on-screen number pad, click the number of the preset you want to run. Click Go.

3.You can clear the preset number from the display window by clicking either C button on the number pad.

PROGRAMMING PATTERNS

You can program as many patterns as your PTZ camera allows. Do the following:

1.Click the Live Video button.

2.Select a PTZ camera by clicking its button.

3.Hold down the mouse button and move the mouse to position the camera to your starting location. Release the button.

4.Using the on-screen number pad, assign an identifier to the pattern.

5.Click the Program button. The program will overlay the picture with a programming message.

6.Place the cursor in the picture again and move the camera as desired.

7.Click End to finish programming the pattern.

OPERATING PATTERNS

1.On the Live Video screen, click the button of the camera for which you want to run a pattern.

2.Using the on-screen number pad, click the number of the pattern you want to run. Click Run.

3.To end, move the camera or select another camera.

78 Pelco Manual C690M-E (11/04)