If you are installing the card for a 16Mbps network, place a jumper over
the pins labeled 16.
3. Switch the printer power off.
Attention: Do not switch the power off if the printer is printing a page. This action
jams the printer.
CAUTION:
Failure to turn off the printer before working with its internal components can
result in electric shock.
4. Unplug the printer from the wall outlet.
5. Remove the power cord from the back of the printer.
6. Move to the back of the printer. Two slots for interface cards are located at the
right side of the back of the printer. If you are installing only one card, use the top
slot.
Chapter 7. Installing Printer Options 137