Loading Paper into the 500-Sheet Paper Trays (Tray 2, Tray 3)

 

 

Note

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Many

applications

allow

you

to

specify the

input

tray

you want to use. This

value

will override any value set

at the printer. If your

application

does

not let you pi

input

tray,

use

the

Paper

Menu

to

select

the

tray.

 

 

 

 

 

 

To

select

the

500-sheet main

paper

tray,

set SOURCE to

TRAY2

or

TRAY3

 

 

(TRAY2

 

if

you

have

only one

500-sheet tray or for the upper

tray if

you

have two;

TRAY3

for

the

lower

tray

if

you

have

two. See “Selecting The

Default

Input

Tray”

on

page 53.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Use the following procedure to load paper into the 500-sheet paper tray:

1. Select printer paper for the 500-sheet paper tray using these guidelines:

Paper

size

A4,

Letter,

13-in.

Legal (Folio), 14-in. Legal

 

 

 

 

 

 

 

 

Paper

weight

16-

to 28-pound paper

2

2

(60 grams/meterto 105 grams/meter)

Paper

Capacity

Up

to 54

mm (2

in.)

maximum stack

height

 

 

 

 

 

 

 

 

2. Remove the 500-sheet paper tray from the printer and place on a flat surface.

36 Network Printer 17: User’s Guide

Page 56
Image 56
IBM S544-5343-03 manual Loading Paper into the 500-Sheet Paper Trays Tray 2, Tray, TRAY2 TRAY3