
Installing a New Transfer Roller
1. Hold | the | new | transfer roller so the arrow on the orange wrapper points toward the |
front | of | the | printer. |
Attention: Do not remove the orange wrapper until the transfer roller has been installed in the printer.
2. Position the transfer roller so | the | ends | are over | the | notches | in the frame and t |
gear end of the shaft is on | the | right | side, as | shown | in the | illustration. |
3. Push down on both ends of the transfer roller until they snap securely into place.
Attention: Do not touch the transfer roller with your hands because skin oils will degrade the transfer roll life.