
Changing the Usage | Kit |
|
The | usable | life of the usage kit depends on the type of paper you use and the |
output you | print. |
The part numbers for replacement usage kits are:
Ÿ Model 001 (120 volt): 63H2324
ŸModel 002 (230 volt): 63H2325
Removing the Used Fuser Unit
Use the following procedure to remove a used fuser unit:
1. Power off the printer.
2. Unplug the printer power cord from the wall outlet.
3. Remove the power cord from the back of the printer.
CAUTION: |
|
|
|
|
|
|
|
|
|
Do not | touch | the | fuser | (labeled) | inside | the | printer. | It | can be extremely hot. |
Always | wait | at | least | 40 minutes | for | the | fuser to | cool | down. |
4. Press the release lever and open the back cover.
CAUTION:
Be careful when removing the duplex unit. The small motor at the end of the duplex unit may be hot.
Chapter 6. Maintaining the Printer117