6.2Service Port Menue
The Service Port Menu is displayed by connecting a PC configured at the Baud Rate set previously (Factory set at 9600) and pressing the $ Key followed by the Esc Key.
Note that the monitor and control unit will not operate when the menu is displayed.
Warwick Wireless Ltd
Advanced Menu | N |
Status | DRBS OK |
Baud Rate | 9600 |
Parity | N |
Odd/Even | E |
RF Power (mW) | N |
RF Channel | Not Used |
Key Transmitter | Not Used |
RSSI | N |
Txmitter Speed | S |
Address Mode | Not Used |
TX Address | Not Used |
RX Address | Not Used |
Restore Defaults | N |
Exit without Save | N |
Save & Exit | N |
Warwick Wireless Ltd
Advanced Menu
Return to Main Menu | N |
Enable AT Instructions | Not Used |
TX Priority | Not Used |
Modem of Operation | 1+2 |
Duty Cycle | 1 |
Packetise Data | Not Used |
Number of Retries | Not Used |
Packet Size | Not Used |
Enable Remote Access | N |
Alarm Code | 00 |
Enable Repeater Path | Not Used |
Set Repeater Path | Not Used |
The menu parameters are change by pressing any of the four Arrow Keys |
| |
Main Menu |
|
|
Advanced Menu: | Pressing the right Arrow Key will display Advanced Menu | . |
Modem ID | A user defined ID number can be set. This is used in the Repeater Chain and also in the | |
| Remote Access Mode. |
|
Baud | Baud Rate 1.2K to 38.4K can be set. Factory set at 9600 Baud |
|
Parity | Enable Parity |
|
Odd/Even | Odd, Even or No Parity can be selected . |
|
RF Power | Displays a Bar Graph of transmitter RF Power. |
|
Key Transmitter | Not used |
|
RSSI | Displays a Bar Graph of Relative Signal Strength. |
|
Txmitter Speed | Not used |
|
