Warwick X7220 manual Configuration

If a second PC is not available simply power up the second modem. Configure the modem connected to the PC in the repeater mode with the address mode switched off. This will command the distant modem to repeat back the characters sent to it.

6.0CONFIGURATION

6.1Communication Port Menu

The Communication Port Menu is displayed by connecting a PC configured at the Baud Rate set previously (Factory set at 9600).

Use the three position Program Switch to select either Modem 1 or Modem 2

Press the Alarm Accept button then type $ and then press the Esc key. The following menu should then appear.

Repeat the above procedure with the Program Switch set to the alternative position.

After exiting the menu return the Program Switch to the vertical position and press the Alarm Accept button.

Warwick Wireless Ltd

X7200-2 Radio Modem V1.0

Local		Remote
Advanced Menu	N	N
Modem ID	00	01
Baud Rate	9600	9600
Parity	N	N
Odd/Even	E	E
RF Power	5	5
RF Channel	17	17
Key Transmitter	N	N
RSSI	N	N
Txmitter Speed	S	S
Address Mode	N	N
TX Address	00	00
RX Address	00	00
RF Sensitivity	50	50
Restore Defaults	N	N
Exit without Save	N	N
Save & Exit	N	N

Warwick Wireless Ltd
Advanced Menu	Local	Remote
Return to Main Menu	N	N
Enable AT Instructions	N	N
TX Priority	N	N
Display Journal	N	N
Packetise Data	N	N
Number of Retries	05	05
Packet Size	256	256
Logger Mode	N	N
Enable Remote Access	N	N
Access Remote	N	N
Enable Repeater Path	N	N
Set Repeater Path	00	00

Local	M01 M02 M03 M04 M05 M06 M07 M08
	M09 M10 M11 M12 M13 M14 M15 M16
Remote	M01 M02 M03 M04 M05 M06 M07 M08
	M09 M10 M11 M12 M13 M14 M15 M16

The menu parameters are change by pressing any of the four Arrow Keys
Main Menu
Advanced Menu:	Pressing the right Arrow Key will display Advanced Menu	.
Modem ID	A user defined ID number can be set. This is used in to set up a Repeater Chain, in the
	Remote Access Mode and with the ATA instruction.
Baud	Baud Rate 1.2K to 38.4K can be set. Factor set at 9600 Baud