Waterpik Technologies CF-261(C) instruction manual Installation Instructions, Operation

Spray

Change

Button

Installation

Instructions

Your new showerhead will fit a standard 1/2 ” shower arm. Do not attach this product to a plastic shower arm since it may not provide adequate support.

Tools are not required. Do not use pipe tape or any other sealants when installing the showerhead. These materials are not necessary and may cause the nut to loosen prematurely. Hand tightening is sufficient to secure the shower thread. Make sure the washer is in the end of the nut.

1. Remove old showerhead. Clean pipe threads thoroughly.

2. Attach the flexible shower arm collar to the showerhead, being

careful to align the threads of the showerhead to the threads

Operation

To change settings, from either the full-body spray or the concentrated power spray, push the button atthe base of the showerhead so it extends to the opposite side of its current position. (It will move horizontally to the showerhead.)

Spray Change Button

Spray Change Button

Shower

Arm Nut

Collar

Flexible Arm

Spray

Change

Button

Bracket

Adapter

5 foot hose

Instruction Manual

Models CF-201(C), CF-261(C)

of the flexible shower arm.

3.	Straighten the flexible shower arm before trying to screw onto
	the shower pipe. Again, take care in aligning the nut to the
	shower pipe so you do not cross threads.
4.	While installing, support the showerhead and
	hold onto the nut rather than the cover.
	Turn only the nut to tighten. Do not twist
	the flexible shower arm covering
	during installation. (This could
	damage the covering and/or
	cause the product to malfunction.)
5.	Tighten the shower nut onto the pipe

Care and Cleaning

Instructions

Clean the filter screen at least once a year, or whenever you notice a drop in water pressure. To remove, unscrew the nut from the pipe. Remove screen by turning it counter-clockwise (pliers may be used) and rinse. The white flow restrictor beneath filter screen is also removable for cleaning. Tip the nut and the flow restrictor will fall out. Flow restrictor must be reinstalled with pointed end facing in. Reinstall filter screen and rubber washer.

•Cleaning is required when mineral deposits appear on the spray orifices to maintain proper working conditions.

•Clean the flexible nozzles by rubbing with a finger or soft bristled toothbrush.

•Soaking and cleaning with household vinegar will help remove mineral build up.

•Do not clean or rinse any part with harsh chemicals, heavy duty cleaners or abrasives. This may damage parts or finish and may void warranty.

Limited Lifetime

Warranty

Flow Control

9.5L per minute maximum flow is limited by the flow restrictor. For low water pressure areas, flow restrictor may be removed. To remove, unscrew filter screen by turning counter- clockwise. Tip pivot ball assembly and flow control will fall out for cleaning or removal.

Filter Screen

Showerhead Nut

Washer

Flow Regulator with O-ring (black O-ring faces out)

	securely by hand. Do not over tighten
	or use pliers.
6.	Slowly turn on cold water and check for leaks. If leaks occur,
	re-tighten all connections.
7.	Do not use excessive force in positioning the showerhead
	and/or arm.
8.	If the showerhead is not maintaining its position, re-tighten the
	showered and shower arm nuts.

Hand-Held

Installation

1.Remove old showerhead. Clean pipe threads thoroughly.

2.Slightly loosen swivel collar on bracket.

3.Hand tighten pivot ball to pipe.

4.Hand tighten adaptor to showerhead.

5.Hand tighten hose to adapter and bracket.

6.Place showerhead in bracket.

Water Pik, Inc. warrants to the original purchaser of this product that it is free from defects in material and workmanship for as long as the original purchaser owns the product. Water Pik will at our election, replace any part of the product which in our opinion is defective, provided that the product has not been abused, misused, altered or damaged after purchase. (This includes damage due to use of tools or harsh chemicals). In the event an item qualifying for warranty action has been discontinued, we will replace it with what we deem to be the closest available product. Water Pik is not responsible for labour charges, installation or other consequential costs. The responsibility of Water Pik shall not exceed the original purchase price of the product. Save your receipt as proof of purchase is required for warranty action.

This product is covered by one or more of the following patents. U.S.: 4,674,687; 5,316,216; 5,449,206(Lic); 5,865,378; 5,997,047(Lic); 6,164,569; 6,164,570; 6,230,989; 6,454,186; 6,626,210; 6,629,651; 6,641,057; 6,739,523; 6,758,826; 7,066,411B2; 7,111,798B2; 7,144,666B2; D406,636; D415,247; D418,902; D418,903; D422,053; D422,336; D427,661; D440,641; D450,805; D450,806; D450,807; D451,169; D451,170; D451,171; D451,172; D451,583; D451,980; D452,553; D452,725; D452,897; D453,370; D453,551; D457,937; D485,887; D490,498; D527,440S; D528,631S; D529,151S; D533,253S; D577,099S; D577,793S; D581,014S; D590,048S; Canadian: 94868; 94871; 96859; 96860; 96861; 96862; 96863; 96864; 96865; 96866; 96867; 96891; 96892; 96893; 96894; 96895; 96896; 2,277,060; Mexico: 15037; 186852; 218192; Germany: 40105034.3; 40502480; M9706460.2; U.K.: 3,021,116; 3,021,863; 3,021,864; E.U.: 000341706-0001; 000341706-0002; 000341706-0003; France: 013345;

Filter	Flow Regulator
Screen

Switzerland: 128049; China: ZL98802624.4; 93120174.8; ZL200530004083.3;

Hong Kong: 1003339; South Korea: 389207; Australia: 726023; Singapore: 44333;

Japan: 1230114; Additional: 00601962 (Belgium, Switzerland, Germany, France, United Kingdom, Italy, Luxembourg, The Netherlands).

Cascadia® is a trademark of Water Pik, Inc. registered in Canada, EU, Switzerland, and the United States.

Waterpik® is a trademark of Water Pik, Inc. registered in Argentina, Australia, Austria, Canada, China, Czech Republic, Hungary, India, Japan, Poland, Russian Federation, South Africa, Switzerland, Ukraine, and the United States.

Waterpik® (stylized) is a trademark of Water Pik, Inc. registered in Canada, EU, Mexico, Switzerland, and the United States.

		Have any questions or need assistance?						© 2009 Water Pik, Inc.
				Call our toll-free Customer Service Line:				Water Pik, Inc.
				888-226-3042				www.waterpik.com
FN 20007766-F AB			8:00 a.m. to 4:00 p.m. MT, Monday-Friday					Printed in China
								Showerhead made in China
	DATE: 27 May 2009    CLIENT: Water Pik, Inc.
	FILENAME: FN20007766-F_AB_CascadiaInst.indd				DESCRIPTION: Cascadia Showerhead Instruction Manual - Canada
	FILE TYPE: Adobe InDesign CS4				PREPARED BY: Brian Colon		FORM: 20007766-F AB
	SIZE FLAT: 8-1/2” x 8-1/2”		SIZE FOLDED: 3-5/8” x 4-1/4”				FOLDS: Vertical trifold, Horiz bifold
	DIELINE: N/A					INK: Black
	NOTES: