Wayne-Dalton 452, 451 FIG. L-1, FIG. L-2, FIG. L-3, Fig L, FIG. L-4, FIG M-1, FIG M-2

FIG L-1, L-2 & L-3

FIG. L-4

EBF

THIS ILLUSTRATION

SHOWS 15” RADIUS

TRACK W/CONCRETE

ANCHOR

FIG. L-1

	THIS ILLUSTRATION SHOWS
	12” RADIUS TRACK W/LAG
	BOLT TO WOOD.
	EBF
	CUT OFF 3” OF WALL
	ANGLE , 12” RADIUS
	APPLICATIONS ONLY
	FIG. L-2
	THIS ILLUSTRATION SHOWS
EBF	15” RADIUS TRACK W/SELF
	DRILLING SCREW TO STEEL
	(3) 3/8” X 3/4” TRUSS
	BOLTS AND NUTS.
	(2) FOR SECURING
	END BRACKET
	(1) FOR SECURING
	HORIZONTAL ANGLE
	TO FLAG ANGLE
	FIG. L-3
	1/4” X 9/16” TRACK
	BOLTS AND NUTS

FIG L

FIG. L-4

CENTER SUPPORT BRACKET		SPRING MOUNTING PAD. 2 X 6 WHITE
		PINE OR DENSER. SECURED WITH MIN.
SLEEVE ANCHOR	(2) 3/8” X 1-1/4” HEX	(4) 5/16” X 4” LAG BOLTS INTO HEADER.
POSITIONED IN
	HEAD BOLTS AND NUTS
BOTTOM SLOT OF		TOP PLATE
SUPPORT BRACKET			(2) 3/8” NUTS
		HEADER	AND WASHERS
PERFORATED ANGLE		(2) 3/8” X 1-1/2”	5/16” X 1-5/8”
(TRIMMED TO CLEAR
			LAG SCREWS
		BOLTS
DOOR HIGH-ARC)
(4) 3/8” x 2-1/2” SLEEVE ANCHOR	SECOND ANCHOR
	FROM BOTTOM		PERIMETER
NOTE: ALL ANCHORS MUST BE
	MUST BE BELOW		SEAL
POSITIONED A MINIMUM OF 1” FROM
	SUPPORT BRACKET
BLOCK EDGE.
FIG M-1		FIG M-2

9