Wayne-Dalton GSM-12 Transfering Controller Devices to Radio Remote Receiver, Sending

Models: GSM-12

1 15

Page 10

1.Connect the communication cable from the GSM-12 to the Remote Radio Receiver.

2.Press the MENU/NO button until the display indicates the Send To Receiver operation.

3.Pressing the ON/YES button will display transfer operation activity.

a)When transfer operation is complete, the GSM-12 will display.

b)If the communication cable is not connected or the connection is not correct, the GSM-12 will display.

c)Then after two seconds the GSM-12 will display.

COMM ERROR

SEND TO RECEIVER

NO YES

SENDING......

SENDING DONE

CHECKING COMM....

COMM ERROR

	GSM-12
MENU/NO	ON/YES

10	You can reach us Toll Free 1-800-676-7734 for Consumer Assistance
	or online at www.waynedalton.com

Image 10

Contents

Gate System Master Controller Table of contents Deﬁnition of Symbol Accessing Battery Compartment Battery Installation Data Cable Connection Genreal Information Protective Cover/Stand GSM-12 Press Menu OperationActivating the GSM-12 Learn DEVICE? No YES Duplicate ID-XXX NEW Learn ID-XXXLearn TIME-OUT ID-XXX Yyyyyyy No ERASE? YES Erasing Individual Devices From The GSM-12Erase DEVICE? Noyes ID-XXX Erased No UNDO? YES Erasing All Devices From GSM-12 Retrieving Free Storage Space Sending Transfering Controller Devices to Radio Remote ReceiverSend to Receiver No YES Sending Done Receiving Transfering Radio Remote Receiver Devices to ControllerGET FRM Receiver No YES Receiving Done Turning Off GSM-12 Turn Unit OFF? Noyes Service Service/Trouble ShootingMaintenance Battery Replacement FCC and IC Statement FCC and IC Statement Limited Warranty GSM-12