CHECK FOR GAS LEAKS
WARNING: Do not ignite burners while checking for leaks.
Check for leaks by wetting the connections with the soap and water solution and watching for bubbles. If bubbles form or if a bubble grows there is a leak.
Check:
a) Hose to manifold connection. Figure 26 (a).
WARNING: If there is a leak at connection a, retighten the fitting with a wrench and recheck for leaks with soap and water solution.
If a leak persists after retightening the fitting, turn OFF the gas. DO NOT OPERATE THE BARBECUE.
Contact your dealer.
b)Manifold to side burner hose connection. Figure 26 (b).
c)Valves to manifold connections. Figure 26 (c).
d)Hose to quick disconnect connection. Figure 26 (d).
e)Side burner supply line to side burner orifice connection. Figure 26 (e).
f)Side burner hose to side burner valve, and side burner supply line to side burner valve. Figure 26 (f).
WARNING: If there is a leak at connections
b, c, d, e or f, turn OFF the gas. DO NOT OPERATE
THE BARBECUE. Contact your dealer.
When leak checks are complete, turn gas supply OFF at the source and rinse connections with water.
(b)
(c)
(a)
(d)
(f)
(e)
View from below
Figure 26
14
