7
INSTALL WARM-UPBASKET
Insert one end of the Warm-Up Basket into the hole in the
right end of the lid and the other end into the slot in the
left end of the lid. Figure 9.
Figure 9
If you have the Platinum Series II
2200, go to step “Install Work
Surfaces” on page 8.
If you have the Platinum Series II
3200, go to step “Install Work Surface
and Side Burner” on page 8.
If you have the Platinum Series II
3400, go to step “Install Work Surface
and Side Burner” on page 10.