INSTALLATION OF CATCH PAN INTO BOTTOM TRAY
Hook the ends of the catch pan holder into the hole in the bottom tray. Figure 4. The front of the catch pan holder must be on the same side as the finger grip of the bottom tray.
Front of 
catch pan
holder 
Finger grip
Figure 4
Slide the bottom tray onto the mounting rails under the cooking box with finger grip toward you.
CAUTION: Do not line bottom tray with aluminum foil. It can cause grease fires by trapping the grease and not allowing grease to flow into the catch pan.
Put the foil drip pan into the catch pan.
Slide the catch pan into the catch pan holder with its finger grip towards you.
REINSTALLATION OF STAINLESS STEEL FLAVORIZER BARS
Note: Remove any tape or packing material. Parts are shipped in place. Use these steps to check that they are in position. The Flavorizer bars are already in place.
This step is only for reinstallation.
Set the long stainless steel Flavorizer bars side to side in the lower position of the cooking box. Insert the front two Flavorizer bars through the
Flue
Figure 5
Set the short stainless steel Flavorizer bars front to back in the upper position. Figure 6. Place
Figure 6
5
