Weber 3400 NG, 2200 NG, 3200 NG manual Tools Needed, Remove Bottom Tray from Grill, Supplies Needed

TOOLS NEEDED

Phillips screwdriver

7/16 inch or adjustable wrench

REMOVE BOTTOM TRAY FROM GRILL

Remove bottom rack from top of packaging. Remove all tape from packaging. Remove outer box. Pull out bottom tray from cooking box. Remove packaging material from bottom tray, catch pan holder, catch pan, and drip pan.

For the Platinum Series II 3400, remove the white plastic from the stainless steel.

SUPPLIES NEEDED

You will need a soap and water solution to check for gas leaks. (See section “Check for Gas Leaks.”)

Refer to exploded view in the Operating Guide if replacement parts are needed.

While we give much attention to our products, unfor- tunately an occasional error may occur. If a part is missing, do not go back to the store. Call the Weber Customer Service Center toll free 1-800-446-1071to receive immediate assistance. Have your owner’s manual and serial number of the barbecue available for reference.

Bottom tray

Figure 2

Bottom wire rack

Bottom tray

Catch pan holder

Catch pan

Drip pan

Four 1/4-20 inch bolts

Four nylon washers

3