Weber 3500 LX owner manual Install the accessory rack, Complete accessory installation

Step 24

Install the accessory rack

You will need: accessory rack.

Rest the left end of the accessory rack on the base panel. Figure 36 (a).

Insert the right hooks into the right side frame slots. Figure 36 (b).

Raise the left end up and slide left hooks into the left side frame slots. Figure 36.

Left side

frame slots

(a)

(b)

Left hooks

Figure 36	Right side
	frame

Step 25

Complete accessory installation

You will need: Warm-Up Basket, warming rack, work table, three tubing plugs, thermometer and a hammer.

Insert one end of the Weber Warm-Up Basket into the hole in the right end of the lid and the other end into the slot in the left end of the lid. Figure 37 (a).

Set the warming rack into the slots at the rear of the cooking box. Figure 37 (b).

Set the work table onto the left side rails. Figure 37 (c).

Insert the thermometer into its holder. Figure 37 (d).

Insert the tubing plugs into the ends of the frame. To fully seat the plugs, you may have to tap them lightly with a hammer. Figure 37 (e).

(a)

(b) (d)

(c)

(e)

Figure 37

27