14 | SIDE BURNER TROUBLESHOOTING | |
|
|
|
|
|
|
PROBLEM | CHECK | CURE |
|
|
|
Side Burner does not light. | Is gas supply off? | Turn supply on. |
| The excess fl ow safety device, which | To reset the excess fl ow safety device turn all burner control knobs and |
| is part of the barbecue to cylinder | the cylinder valve OFF. Disconnect the regulator from the cylinder. Turn |
| connection, may have activated. | burner control knobs to HIGH. Wait at least 1 minute. Turn burner control |
|
| knobs OFF. Reconnect the regulator to the cylinder. Turn cylinder valve |
|
| on slowly. Refer to “Lighting Instructions”. |
|
|
|
Flame is low in HIGH position | Is the fuel hose bent or kinked? | Straighten hose. |
|
|
|
Push button ignition does not | Does burner light with a match? | If match lights burner, check igniter (see below). |
work. |
|
|
|
|
|
If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area using the contact information on our web site. Log onto www.weber.com®.
SIDE BURNER MAINTENANCE
WARNING: All gas controls and supply valves should be in the OFF position.
Make sure wire is connected between the igniter and electrode. Spark should be a white/blue color, not yellow.
1)Igniter Wire
2)Burner
(3)
Side Burner Grate
Side Burner Cap
Side Burner Ring & Head
Igniter Electrode
Control Knob
Igniter
