Weber 42376 manual Connect Gas Supply, Gas Instructions, top of box, back of box, Side View

8 GAS INSTRUCTIONS

3). The minimum size of the ventilation hole (s) should not be less than 1/4 inch.

d). The remote LP cylinder enclosure should be constructed with non- combustible materials. The remote LP cylinder enclosure should isolate the LP cylinder from the burner compartment, so that it provides shielding from radiation, be a fl ame barrier and provide protection from foreign material such as hot drippings.

e). There should be a minimum of 2 inches (50.8mm) between the ground and the fl oor of the remote LP cylinder enclosure.

f). The LP cylinder valve should be readily accessible for hand operation. A door on the remote LP cylinder enclosure to gain access to the LP cylinder valve is acceptable, provided it is non-locking and can be opened without the use of tools.

If your licensed contractor or licensed plumber builds an LP cylinder enclosure following the guidelines in the ANSI Standard for Outdoor Cooking Gas Appliances,

Z21.58 CSA 1.6, you need to order kit number (#21287), which will contain the hose and regulator assembly, mounting bracket for the regulator, connection

fittings and LP tank bracket for retaining the LP cylinder that must be used with the Summit® Built-In gas grill. The hose and regulator in the kit (#21287) is listed as part of the CSA listed Summit® Built-In gas grill.

If you do not follow the DANGER statements exactly, the Warranty on the Summit® Built-In gas grill will be voided.

CONNECT GAS SUPPLY

1)Uncap the fl are fi tting from the optional side burner connection located

inside the Summit® Built-In Tank Cabinet (#21280).

Note: We strongly recommend that you use the Summit® Built-In Tank Cabinet (#21280) for installations using a 20 lb LP cylinder, mounted remotely in an “island” structure.

If your, licensed contractor or licensed plumber, builds an LP cylinder enclosure following the guidelines in the ANSI Standard for Outdoor Cooking Gas Appliances,

Z21.58 CSA 1.6, you need to order kit number (#21287).

2)Connect the corrugated gas line to the side burner Connection.

top of box

DANGER

Use of any other hose and regulator assembly could be dangerous, and may not provide adequate gas supply to the Summit® Built-In gas grill, and could result in a fire or an explosion causing serious bodily injury or death, and damage to property.

Plug unused hole with supplied plug.

back of box

90º

fitting

Connection to

LP Tank Cap

(Optional Side Burner)

DANGER

Side View

Failure to use the Summit® Built-In Tank Cabinet for a 20 lb cylinder or failure to build a LP cylinder enclosure for a 20 lb cylinder following the requirements for ventilation, cylinder retention and separation of the LP cylinder from a heat source, listed in the ANSI Standard for Outdoor Cooking Gas Appliances, ANSI Z21.58 CSA 1.6, could be dangerous, and could result in a fire or an explosion causing serious bodily injury or death and damage to property.

Plug unused hole with supplied plug.

back of box

top of box

90º

fitting

Connection to

LP Tank

to side burner

Side View