Typical installation of the base for an existing concrete patio, new pad or wood deck (continued)
Method 4 - Wood deck
After assembling the base according to the assembly instructions, position the base assembly on your deck for anchoring.
CAUTION: Combustible materials should never be within 24 inches of the top, bottom, back or sides of the barbecue. Do not locate under overhead combustible construction.
CAUTION: For a deck installation, it is recommended to anchor one screw into a joist.
Note - With the lid open, the depth of the barbecue is 28 inches, front to back.
Anchor the base to the deck. We recommend using a minimum of a 3/8 inch x 1 1/2 inch lag bolt with a 3/8 inch flat washer. Figure 9.
Note - Use a 3/16 inch drill bit for drilling a pilot hole for a 3/8 inch lag bolt.
3/8 inch x 1 1/2 inch lag bolt
3/8 inch flat washer
Mount plate
Drilled hole
Figure 9
WARNING: Whichever method used, the base must be bolted down (anchored) at a minimum of four anchoring points (two per side) prior to barbecue assembly. One anchor in each corner of the base plate. Figure 10.
1
4
2
3
Figure 10
18
