SIDE BURNER IGNITION & USAGE
SIDE BURNER IGNITION
m DANGER
Failure to open the lid while igniting the side burner, or not waiting 5 minutes to allow the gas to clear if the side burner does not light, may result in an explosive
mWARNING: Check hose before each use of barbecue for nicks, cracking, abrasions or cuts. If the hose is found to be damaged in any way, do not use the barbecue. Replace using only Weber® authorized replacement hose. Contact the Customer Service Representative in your area using the contact information on our web site.
Log onto www.weber.com®.
A)Open the side burner lid (1)..
B)Check that the side burner valve is turned off (Push control knob in and turn clockwise to ensure that it is in the OFF position), turn all burners not being used to the OFF position (push in and turn clockwise) (2)..
C)Turn the gas supply valve on (3)..
D)Push down and turn the side burner control valve to HI (4)..
E)Press the igniter button several times so it clicks each time until you see a flame (5)..
mCAUTION: Side burner flame may be difficult to see on a
bright sunny day.
mWARNING: If the side burner does not light in five seconds:
a) Turn off the side burner control valve, main burners and gas supply at source.
b) Wait 5 minutes to let the gas clear before you try again, or try lighting with a match (see “SIDE BURNER MANUAL IGNITION”). ◆
OFF
START/HI
LOW
1
5
2 4
2
3
www.weber.com® 19
