Assembly
Supplies needed
You will need a soap and water solution to check for gas leaks. (See Step "Check for gas leaks.")
Refer to exploded view if replacement parts are needed.
Your LP tank is shipped empty for safety. After setting the LP fuel scale you will need to fill it. (See Step "Fill LP tank.")
While we give much attention to our products, unfor- tunately an occasional error may occur. If a part is missing, do not go back to the store. Call the Weber Customer Service Center toll free
Step 1
Removal of all tape
Remove tape from the following locations:
front and rear of side work tables
swing tables
swing table slide bars
bottom tray beneath the cooking box
bottom accessory trays
Step 2
Remove packaged parts
Remove and unpackage glass door assemblies, warming rack, Weber
Note - Be sure no packaging material is left in the cooking box before reinstalling parts.
Corrugated box containing glass doors
Warming basket
Weber
Basket
Cooking grates
Short Stainless
Steel Flavorizer
Bars
Long Stainless
Steel Flavorizer
Bars
Figure 2
Remove packaging material from the side burner.
Figure 3.
| protective plastic |
Figure 1 | on the stainless |
steel lid | |
| protective paper |
| cap on the burner |
Figure 3
3
