Remove the burner control knobs. Figure 15 (a). While standing at the right end of the barbecue, grasp the under the edge of the control panel at the control panel
(a)
control panel
buttons
(b)
Figure 15
Step 12
Check that items are secured
Note - Although the following items were factory assembled, check that they have not loosened during shipping and handling.
Remove the tape from the manifold bracket.
Check that the bracket is securely hooked onto the frame brace and under the manifold at the center burner valve. Figure 16.
If it is loose lift the bracket, manifold and cooking box slightly as a unit and reposition onto the frame brace.
Manifold Bracket
Manifold Bracket
Check that the igniter is secure in the frame brace and has not shifted out of the key hole. Figure 17.
If it is loose, slide the igniter into the rear of the key hole. Carefully tighten the igniter lock nut with an adjustable wrench or pliers.
(a)
Frame brace
(b)
Keyhole in | Igniter lock nut |
frame brace | |
| (c) |
Frame brace 
Small part of keyhole in frame brace
Figure 17
Figure 16 | 8 |
