MAINTENANCE
9.Slide the burner assembly from each Heat Zone. The left and right burners are connected by the Crossover
tube. Figure 13 (a).
Pull out of here
(a)
Crossover tube
11. To reinstall the burners, reverse steps 3 through 10.
mCAUTION: The burner openings must be positioned properly over the valve orifices. Figure 15(a).
Check proper assembly before fastening manifold in place. Figure 15 (b).
(a)
Valve
Burner
Orifice
(b)
Figure 13
10.Lift and twist the burner assembly slightly to separate the crossover tube from the burners. Remove the burners from the cooking box. Figure 14.
Separate here | Figure 15 |
Crossover tube
Figure 14
15
