Manual Lighting, OFF the cylinder and burner control

	Manual Lighting	3) Turn the cylinder on by turning the cylinder valve
	Manual Lighting	counterclockwise.
	m DANGER	4) Strike a match and put the flame into the
	Failure to open the lid while igniting the	matchlight hole in the front of the cooking box.
	barbecue’s burners, or not waiting 5 min-	m WARNING: Do not lean over open barbecue.
	barbecue’s burners, or not waiting 5 min-	Keep your face and body at least one foot away
	utes to allow the gas to clear if the barbe-	Keep your face and body at least one foot away
	utes to allow the gas to clear if the barbe-	from the matchlight hole when lighting the barbe-
	cue does not light, may result in an explo-	cue.
	sive flame-up which can cause serious	5) Push Front burner control knob down and turn to
	bodily injury or death.	START/HI.
	1) Open the lid.	6) Check that the burner is lit by looking through the
	1) Open the lid.	matchlight hole on the front of the cooking box.
	2) Make sure all burner control knobs are turned	matchlight hole on the front of the cooking box.
	2) Make sure all burner control knobs are turned	You should see a flame
	OFF. (Push each knob down and turn clockwise to	You should see a flame
	OFF. (Push each knob down and turn clockwise to	m WARNING: If the burner does not light, turn the
	ensure they are in the off position.)	m WARNING: If the burner does not light, turn the
	ensure they are in the off position.)	Front burner control knob to OFF and wait 5
	m WARNING: The burner control knobs must be in	Front burner control knob to OFF and wait 5
	m WARNING: The burner control knobs must be in	minutes to let the gas clear before you try again or
	the OFF position before turning on the liquid	minutes to let the gas clear before you try again or
	the OFF position before turning on the liquid	try to light with a match.
	propane cylinder valve. If they are not in the OFF	try to light with a match.
	propane cylinder valve. If they are not in the OFF	7) After the FRONT burner is lit you can turn on the
	position, when you turn on the LP cylinder valve,	7) After the FRONT burner is lit you can turn on the
	position, when you turn on the LP cylinder valve,	other burner.
	the “excess gas flow control” feature will activate,	other burner.
	the “excess gas flow control” feature will activate,	Note - Always light the FRONT burner first. The other
	limiting the flow of gas from the LP cylinder. If this	Note - Always light the FRONT burner first. The other
	limiting the flow of gas from the LP cylinder. If this	burner or burners ignite from the FRONT burner.
	should occur, turn OFF the LP tank valve and	burner or burners ignite from the FRONT burner.
	should occur, turn OFF the LP tank valve and
	burner control knobs. Then start over.
	m DANGER
	When the “excess gas flow control” fea-
	ture is activated, a small amount of gas is	To Extinguish
	still flowing to the burners. After turning	To Extinguish
	OFF the cylinder and burner control	Push down and turn each burner control knob
	knobs, wait at least 5 minutes for the gas	clockwise to the OFF position. Turn gas supply
	to clear before attempting to light the	OFF at the source.
	to clear before attempting to light the
	barbecue. Failure to do so may result in
	an explosive flame-up, which can cause
	serious bodily injury or death.
	1