Weber Gold B manual Replacing Main Burners, Positioned properly over the valve orifices2

Replacing Main Burners		7) Lift and twist the burner assembly slightly, to
1)	Your Weber Gas Barbecue must be OFF and cool.	separate the crossover tube(1) from the burners.
2)	Turn gas OFF at source.	Remove the burners from the cooking box.
3)	To remove control panel: take off the burner
	control knobs. Remove the screws holding the
	control panel in place. Lift off the control panel.	(1)
4)	Unlatch the Spider Stopper™ Guards and remove
	them.

	8) To reinstall the burners, reverse 3) through 7).
	m CAUTION: The burner openings(1) must be
5) Remove the manifold bracket and unscrew the two	positioned properly over the valve orifices(2).
	Check proper assembly before fastening manifold in
wing nuts(1) that hold the manifold to the cooking
	place.
box. Pull the manifold and valve assembly out of
the burners and carefully set it down.	(2)

(1)

(1)

6)Slide the burner assembly out from under the guide screw and washer(1) in the corners of the cooking box.

(1)

D-9