OPERATION
KNOW YOUR TRIMMER
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.
Trigger Switch
Assist Handle |
|
|
Twist and Edge Button |
| |
Cord | Motor Housing | |
Retainer Recessed |
| Edge Guide |
Plug |
|
|
Air Vents |
|
|
Debris Shield |
| Trimmer Head |
|
| with 0.065 inch |
Line Limiter Blade | Trimmer Line | |
|
RECESSED PLUG
The RECESSED PLUG is where you attach your extension cord to the unit.
TRIGGER SWITCH
The TRIGGER SWITCH is used to turn on the unit. Squeeze the trigger switch to operate the unit. Release to stop.
LINE LIMITER BLADE
The LINE LIMITER BLADE cuts the cutting line to the proper cutting length.
ASSIST HANDLE
The ASSIST HANDLE is used to help hold and guide the unit.
TRIMMER HEAD
The TRIMMER HEAD holds the cutting line and rotates during operation.
TWIST AND EDGE BUTTON
The TWIST AND EDGE BUTTON is used to twist the lower portion of the unit into an edg- ing position.
EDGE GUIDE
The EDGE GUIDE protects the unit from con- tacting the ground during edging.
OPERATING INSTRUCTIONS
Use only a voltage supply as specified on your unit.
SELECT AN EXTENSION CORD
Extension Cord Gauge Chart
Length of Cord |
| Gauge | |
25 | Ft. (7.5 m) |
| 18 Gauge |
50 | Ft. (15 m) |
| 16 Gauge |
100 Ft. (30 m) |
| 16 Gauge | |
|
Extension cords are available for this unit.
ATTACH THE EXTENSION
CORD TO YOUR TRIMMER
Loop your extension cord through the handle and around the hook as shown. Insure the plug and cord are firmly and fully engaged.
Cord Retainer
Extension Cord
CORRECT OPERATING POSITION
TrimmingEdging
WARNING: Always wear eye protec- tion. Never lean over the trimmer head. Rocks or debris can ricochet or be thrown into eyes and face and cause blindness or other serious injury.
5