USER REPLACEABLE SERVICE PARTS

REPLACEMENT PART

PART NUMBER

Spool with 0.065 inch Trimmer Line

952711602

Line Guide Ring

530403949

Cap Assembly

530403810

Assist Handle

530403805

Bolt Carriage, 1/4-20

530403886

Wing Nut

530016152

Shield Assembly

530403914

Edge Guide

530403824

STORAGE

WARNING: Perform the following steps after each use.

S Stop the unit and disconnect the power source when not in use.

SCarry the unit with motor stopped.

SStore the unit so the line limiter blade can- not cause injury.

SStore unit and extension cord indoors in a high, dry place out of the reach of children.

Store unit unplugged.

SStore unit with all guards in place. Position unit so that any sharp object cannot acci- dentally cause injury.

TROUBLESHOOTING TABLE

WARNING: Always stop unit and disconnect from the power source before per- forming all of the recommended remedies below except remedies that require unit to be operating.

TROUBLE

CAUSE

REMEDY

Trimmer head

1.

Crowding trimmer line

1.

Allow tip of line to do the cutting.

stops under a

 

against material being

 

 

load or does not

 

cut.

2.

Contact your authorized service dealer.

turn when switch

2.

Electrical failure.

is pressed.

3.

Thrown circuit breaker.

3.

Check breaker box.

 

4.

Debris stopping head.

4.

Remove debris.

 

 

 

 

 

Line does not

1.

Line improperly routed

1.

Check line routing.

advance or

 

in head.

 

 

breaks while

2.

Line improperly

2.

Rewind line tightly and evenly.

cutting.

 

wound into spool.

3.

Use only 0.065 inch (1.65 mm) dia. line.

 

3.

Incorrect line size

 

4.

Not enough line

4.

Remove cover and pull 4 inches

 

 

outside of head.

 

(10 cm) of line out of head.

 

5.

Dirt buildup on unit.

5.

Clean unit.

Line welds onto

1.

Line size is incorrect.

1. Use only 0.065 inch (1.65 mm) dia. line.

spool.

2.

Incorrect spool.

2. Replace with correct spool.

 

3.

Line is being crowded

3. Cut with tip of line fully extended.

 

 

against material being

 

 

 

 

cut.

 

 

Line releases

1.

Line improperly

1. Check line routing.

continuously.

 

routed in head.

 

 

 

2.

Spool damaged.

2. Replace spool.

 

 

 

 

Line usage is

1.

Line improperly routed

1. Check line routing.

excessive.

 

in head.

2. Replace spool.

 

2.

Line size is incorrect.

 

3.

Crowding line against

3. Cut with tip of line fully extended.

 

 

material being cut.

4. Replace spool.

 

4.

Spool worn or damaged.

 

 

 

Line pulls back

1. Too little line outside

1. Remove cover and pull 4 inches

into head.

 

of head.

 

(10 cm) of line outside of head.

 

2. Line size incorrect.

2. Use only 0.065 inch (1.65 mm) dia. line.

8

Page 8
Image 8
Weed Eater 545117527 User Replaceable Service Parts, Troubleshooting Table Cause Remedy, Electrical failure

545117527 specifications

The Weed Eater 545117527 is a powerful and versatile string trimmer that has gained a reputation for its reliability and performance in yard maintenance. Designed for both residential and light commercial use, this trimmer is equipped with a range of features that make it an essential tool for keeping lawns and gardens neat and tidy.

One of the main features of the Weed Eater 545117527 is its lightweight design, which allows users to maneuver the trimmer easily without experiencing fatigue during extended use. Weighing in at just under 10 pounds, it is easy to carry and operate, making it an excellent choice for both novice gardeners and seasoned landscapers alike.

The trimmer is powered by a robust 25cc 2-cycle engine that delivers ample power for cutting through thick grass and weeds. This engine provides a high RPM output, ensuring that the cutting head rotates at a speed that allows for efficient trimming. The 2-cycle engine is not only powerful but also offers an excellent power-to-weight ratio, allowing users to tackle tough jobs without being bogged down.

Another notable feature of the Weed Eater 545117527 is its spool design, which utilizes an automatic bump feed system. This system allows users to easily advance the cutting line simply by tapping the trimmer head on the ground while in use. This convenience means that gardeners can focus on their trimming tasks without having to stop and manually feed the line, making the process more efficient.

The adjustable handle of the Weed Eater 545117527 provides further customization for user comfort. The design includes a D-handle, which can be adjusted to fit different user heights and preferences. This feature not only enhances comfort but also promotes better control of the trimmer, allowing for more precise trimming in hard-to-reach places.

In terms of durability, the Weed Eater 545117527 is built with high-quality materials that can withstand the rigors of frequent use. The trimmer's robust construction ensures that it will hold up well over time, even when used in challenging outdoor environments. Additionally, maintenance is simplified due to easily accessible components, allowing users to perform routine checks and repairs without hassle.

Overall, the Weed Eater 545117527 is an exceptional choice for anyone looking for a reliable and efficient string trimmer. With its lightweight design, powerful engine, automatic line feed, adjustable handle, and durable construction, this trimmer offers everything needed to keep outdoor spaces well-groomed and aesthetically pleasing. Whether you are trimming edges, tackling overgrown areas, or maintaining flower beds, the Weed Eater 545117527 stands out as a dependable tool for all your yard maintenance needs.