7. Slide the Right Upright Sleeve (96) up against | 7 |
|
|
the console assembly. Attach the Right Upright |
|
| |
Sleeve with two 3/4" Screws (4). |
|
|
|
Attach the Left Upright Sleeve (not shown) to the | 73 |
|
|
Left Upright (73) as described above. |
| 4 | |
|
|
| |
|
|
| 96 |
|
| 4 | 74 |
8. With the help of a second person, raise the front | 8 |
|
|
of the treadmill and insert the crossbar on the |
|
| |
Base (83) into the cutout in the cardboard stand |
|
|
|
as shown. Have a second person hold the |
|
|
|
treadmill to prevent it from moving forward |
|
|
|
or backward. |
|
|
|
Firmly tighten the four Upright Bolts (72). With |
|
| 72 |
the help of a second person, lower the treadmill |
|
| |
off the cardboard stand. |
|
|
|
| 72 | 83 | Cardboard |
|
| ||
|
| Stand | |
9. Note the location of the 75 ohm terminal and the | 9 |
|
|
audio/video input jack on the treadmill. For the |
| Audio/ | |
television to operate, the included Audio/Video |
|
| |
Wire Harness (115) and your DVD player or VCR |
|
| Video |
must be connected to the audio/video input jack |
|
| Input |
on the treadmill or a CATV cable must be con- |
|
|
|
nected to the 75 ohm terminal (see page 11). |
|
| 75 Ohm |
|
|
| Terminal |
|
|
| 115 |
10.Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see page 27). To protect the floor or car- pet from damage, place a mat under the treadmill.
10
