10.Press a 76mm Round Outer Cap (25) onto each side of the Stabilizer (49).
Press two 50mm Square Inner Caps (21) into the Bench Frame (39).
Attach the Stabilizer (49) to the Bench Frame (39) with two M8 x 68mm Bolts (1), two M8 Washers (15), and two M8 Nylon Locknuts (11).
11.Press 20mm x 40mm Inner Caps (27) into the ends of both Backrest Brackets (38).
Lubricate an M10 x 127mm Bolt (4). Using the indi- cated holes, attach the Backrest Brackets (38) to the Bench Frame (39) with the M10 x 127mm Bolt and an M10 Nylon Locknut (12). The Backrest
Brackets must be oriented as shown. Do not overtighten the Nylon Locknut; the Backrest Brackets must be able to move freely.
12.Lubricate an M10 x 127mm Bolt (4). Attach the Adjustment Bracket (51) to the Backrest Brackets (38) with the M10 x 127mm Bolt and an M10 Nylon Locknut (12). Do not overtighten the Nylon
Locknut; the Backrest Brackets and Adjustment Bracket must be able to move freely.
Align one set of holes in the Adjustment Bracket
(51)with the hole in the Bench Frame (39). Insert the
13.Lubricate an M10 x 127mm Bolt (4). Attach the Seat Frame (44) to the Backrest Brackets (38) with the M10 x 127mm Bolt and an M10 Nylon Locknut
(12).Do not overtighten the Nylon Locknut; the Backrest Brackets and Seat Frame must be able to move freely.
Press a 38mm x 50mm Inner Cap (22) into the Seat Frame (44).
9
10 |
|
|
| 25 |
|
15 |
| 21 |
1 |
| |
|
| |
| 1 |
|
49 | 39 |
|
|
| |
25 |
|
|
11 |
|
|
27 |
|
|
38 |
|
|
| 12 |
|
|
| |
| 27 |
|
| 39 |
|
12 |
|
|
Lubricate | 12 |
|
|
| |
4 | 38 |
|
|
| |
50 | 39 |
|
51 |
| |
|
| |
13 |
|
|
| 38 |
|
| 44 |
|
| 12 |
|
| 4 | 22 |
| Lubricate |
|
