12.Press two 1” Square Inner Caps (54) into the indi- cated end of the Backrest Frame (15).
Attach a Plastic Foot (53) to the Backrest Frame (15) with a #8 x 3/4” Tek Screw (62).
Attach the two Guard Plates (17) to the inside of the Backrest Frame (15) with four #8 x 1/2” Tek Screws (56).
13.Orient the Backrest (14) and the Backrest Backing (8) as shown. Attach the Backrest and the Backrest Backing to the Backrest Frame (15) with four 1/4” x 1 3/4” Bolts (58).
14.Insert the rod on the Backrest Frame (15) into the slot in the Seat Carriage (12). Hold the Backrest
Frame vertically over the Seat Carriage and slide the rod into the slot, as shown in the inset drawing.
15.Attach the two
Using ten #8 x 1/2” Flat Head Screws (85), attach the two
(100)to the two
12 | 15 |
|
|
| |
|
| 53 |
|
| 62 |
54 | 56 |
|
|
| |
17 |
|
|
56 |
|
|
17 |
|
|
13 |
|
|
14 |
|
|
8 |
|
|
15 |
|
|
| 58 |
|
14 |
|
|
Rod |
|
|
15 |
|
|
| 15 |
|
12 | Rod |
|
|
| |
|
| Slot |
|
| 12 |
15 |
|
|
| 95 | 96 |
| 79 | |
|
| |
| 36 | 85 |
67 |
|
|
44 | 85 | 100 |
85 |
| |
|
| |
| 88 | |
| 85 |
|
| 101 |
|
85 | 20 |
|
9