LOCKING THE INVERSION SYSTEM
When the inversion system is not in use, it should be locked to prevent unsupervised use. Wrap the Lock Cable (62) around the Front Leg Frame (5) and the Adjustment Frame (7) as shown. Then, connect the ends of the Lock Cable with an M8 x 20mm Button Bolt (64) and an M8 Locknut (54).
STORING THE INVERSION SYSTEM
To store the inversion system, first adjust the Adjustment Frame (7) to the shortest length (see ADJUSTING THE ADJUSTMENT FRAME on page 13). Next, adjust the Ankle Lock (9) to the position closest to the Adjustment Frame (see ADJUSTING THE ANKLE LOCK on page 13). Then, lift on the Link Bars (10, 11, 12) and fold the Front and Rear Legs (1, 2, 3) together.
WARNING: Always make sure that the Link Bars (10, 11, 12) are straight across before you use the inversion system.
54 | 5 | 7 |
| 62 | |
|
| 64 |
| 10 | 12 |
|
|
1 | 7 | 3 |
| |
| 3 | |||
9 |
|
| 12 | |
|
| 11 |
| |
|
|
|
| |
|
|
| 2 |
|
14
