17.Insert the rod on the Backrest Frame (15) into the slot in the Seat Carriage (12). Hold the Backrest vertically over the Seat Carriage and slide the rod into the slot, as shown in the inset draw- ing.
18.Locate the Long Cable (80). Slide one end of the Cable through the Pulley Arm (22) as shown in the inset drawing.
Wrap the Long Cable (80) around a 90mm Pulley (28). Attach the Pulley to the Pulley Arm (22) with an M10 x 40mm Bolt (71) and an M10 Nylon Locknut (76).
19.Wrap the Long Cable (80) around a 90mm Pulley
(28).Attach the Pulley and a Cable Trap (29) to the Upright Base (3) with an M10 x 132mm Bolt
(72)and an M10 Nylon Locknut (76).
17 |
|
|
|
| Rod |
|
| 15 |
|
| 12 |
Rod |
| |
15 |
|
|
Slot |
|
|
12 |
|
|
18 |
|
|
|
| 80 |
|
| 22 |
71 |
|
|
22 |
|
|
| 28 |
|
|
| 80 |
76 |
|
|
19 |
|
|
76 | 28 | 29 |
| 80 | 72 |
|
| |
10 |
|
|
