PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST on the reverse side of this page. Note: Some small parts may have been
M6 Nylon Locknut (69)
M8 Flange Nut (19) | M10 Nut (47) |
M10 Washer (75)
M8 Nylon Locknut (65) | M10 Nylon Locknut (76) M10 Lock Washer (21) |
38mm x 64mm Inner Cap (41)
25mm Square Inner Cap (54)
50mm Square
Inner Cap (38)
38mm x 76mm Inner Cap (34)
50mm Square Outer Cap (27)
