Weider WESY49202 user manual Locate the Military Press Cable 72. Attach

CABLE ASSEMBLY

31. Attach the end of the Low Cable (23) to the	31
Long “U”-Bracket (57) with an M8 Nylon
Locknut (3) and an M8 Washer (8). Do not
completely tighten the Nylon Locknut. It
should be threaded onto the end of the
Cable so only a couple of threads are				57
showing above the Nylon Locknut, as			3
shown in the inset drawing.
		3	8
			8
	23	57		23
32. Attach the High Cable (58) to a Small “U”-	32
Bracket (71) with an M8 Washer (8) and an
M8 Nylon Locknut (3). Do not completely
tighten the Nylon Locknut. It should be
threaded onto the end of the Cable only a
couple of turns, as shown in the inset
drawing.			58
Attach the Small “U”-Bracket (71) to the Short
Weight Tube (108) with an M8 x 45mm Bolt
(24) and an M8 Nylon Locknut (3).
			3
			71
			108	24
				8
	71	58		3
		8
		3
33. Locate the Military Press Cable (72). Attach	33			72
the Military Press Cable to the other Small
		3
“U”-Bracket (71) with an M8 Washer (8) and
an M8 Nylon Locknut (3). Do not completely				71
tighten the Nylon Locknut. It should be
threaded onto the end of the Cable only a		63		24
couple of turns, as shown in the inset
drawing.				8
		72
Attach the Small “U”-Bracket (71) to the Long	71
				3
Weight Tube (63) with an M8 x 45mm Bolt		8
(24) and an M8 Nylon Locknut (3).
		3

15