CABLE ASSEMBLY
22. Locate the Medium Cable (58). Route the | 22 |
|
|
Medium Cable (58) under the 3 1/2Ó Pulley |
|
| |
|
|
| |
(15) attached to the bracket on the Press |
|
|
|
Frame (17). Be sure that the end of the |
|
| 17 |
Cable with the ball is on the indicated side |
|
| |
of the Press Frame and that the Cable is |
|
| 15 |
between the Pulley and the crossbar on |
|
| |
|
|
| |
the Press Frame. |
|
| Ball |
| 58 |
| Crossbar |
|
|
| |
|
| 21 |
|
23. Route the Medium Cable (58) around the | 23 |
| 42 |
3 1/2Ó Pulley (15) attached to the lower hole |
| ||
42 |
| ||
| 15 | ||
in the Front Upright (42). See the inset draw- |
|
| |
|
|
| |
ing. Be sure that the Cable Trap (66) is | 15 |
| 71 |
turned to hold the Cable in place and that |
| ||
|
| ||
|
|
| |
the Cable is routed around the Pulley as |
|
|
|
shown. Tighten the 3/8Ó Nylon Locknut (21) |
| 58 | 66 |
and the 3/8Ó x 3 3/4Ó Bolt (71). |
| 58 | |
|
|
| |
| 21 |
| Inset shows view |
|
|
| |
|
|
| from other side |
24. Route the Medium Cable (58) around the | 24 |
|
|
3 1/2Ó Pulley (15) attached to the upper hole |
|
| |
|
|
| |
in the Press Frame (17). Be sure that the |
|
| 58 |
Cable Trap (66) is turned to hold the Cable |
|
| |
|
|
| |
in place and that the Cable is routed |
|
| 15 |
around the Pulley as shown. Make sure the |
|
|
|
3/8Ó Nylon Locknut (21) and the 3/8Ó x 3 1/2Ó |
|
| 66 |
Bolt (not shown) are tight. |
|
| 21 |
|
|
| |
|
|
| 17 |
25. Route the Medium Cable (58) around the | 25 |
| 42 |
3 1/2Ó Pulley (15) attached to the upper hole |
| ||
58 |
| 15 | |
in the Front Upright (42). See the inset draw- |
| ||
|
|
| |
ing. Be sure that the Cable Trap (66) is | 15 |
| 71 |
turned to hold the Cable in place and that |
| ||
42 |
|
| |
the Cable is routed around the Pulley as |
|
| |
shown. Tighten the 3/8Ó Nylon Locknut (21) |
|
| 66 |
and the 3/8Ó x 3 3/4Ó Bolt (71). | 21 |
| 58 |
|
|
| Inset shows view |
|
|
| from other side |
12
