SEAT ASSEMBLY
29.Press a 1 1/2Ó Square Inner Cap (32) into the Seat Frame (36).
Insert the 1/4Ó x 2Ó Carriage Bolt (38) into the center hole in the Seat Plate (37). Attach the Seat Plate to the Seat (13) with two 1/4Ó x 3/4Ó Screws (18).
Insert the 1/4Ó x 2Ó Carriage Bolt (38) into the indicated hole in the Seat Frame (36). Tighten a 1/4Ó Nylon Locknut (2) with a 1/4Ó Flat Washer (10) onto the Carriage Bolt.
Attach the other end of the Seat (13) to the Seat Frame (36) with a 1/4Ó Flat Washer (10) and a 1/4Ó x 2Ó Screw (24).
30.Lubricate the 5/16Ó x 2 1/4Ó Bolt (33). Attach the Leg Lever (29) to the Seat Frame (36) with the Bolt and a 5/16Ó Nylon Locknut (3).
31.Attach the Short Cable (35) to one of the three holes in the Leg Lever (29) with a 5/16Ó x 3/4Ó Bolt (73), a 5/16Ó Washer (8), and a 5/16Ó Nylon Locknut (3). Note: The three holes are for cable adjustment. Insert the Short Cable between the welded rod and the Leg Lever.
Press a 1Ó Round Inner Cap (49) into each end of the Curl Bar (77). Insert a Cable Clip
(53)through the upper hole in the Curl Bar and through the Short Cable (35). Insert a 5/16Ó x 1 3/4Ó Carriage Bolt (72) through the lower hole in the Curl Bar. Tighten a 5/16Ó Nylon Locknut (3) onto the Carriage Bolt.
32.Rest the Seat Frame (36) on the indicated pin on the Front Upright (42). Attach the Seat Frame to the Front Upright with a 5/16Ó x
2 3/4Ó Carriage Bolt (14) and the Seat Knob
14
29 |
|
|
|
|
|
|
| 13 |
|
| 38 |
|
|
|
| 37 |
|
|
|
|
|
| 18 |
|
36 |
|
|
| 32 |
24 | 10 | 2 |
| |
30 |
|
|
|
|
|
|
| 36 |
|
| 33 |
|
| 3 |
|
|
|
| |
| Lubricate |
|
| |
|
|
|
| 29 |
31 |
|
|
|
|
|
|
| 29 |
|
| 73 |
|
|
|
| 8 |
|
|
|
| 3 |
|
|
|
Welded Rod |
| 35 | 49 | |
53 |
|
| ||
|
|
|
| |
| 3 |
|
| |
| 49 |
| 77 | 72 |
32 | 40 | 36 |
|
|
|
|
| ||
14 |
|
|
|
|
Pin |
|
|
|
|
42 |
|
|
|
|
