PFG Series 7
Section III: Replacement Parts
The boiler contains ceramic fiber and fiberglass materials. Use care when handling these materials, per instructions on page 15 of this manual. Failure to comply could result in severe personal injury.
To avoid personal injury, before replacing any parts on the boiler:
1. Turn off power.
. Shut off gas supply. 3. Allow boiler to cool.
Item | Description | Part Number | |
1 | Draft hood: | ||
|
| ||
|
| ||
|
| ||
2 | Collector hood: | ||
|
| ||
|
| ||
|
| ||
3 | Right hand end section, 51113 |
| |
4 | Intermediate section, 51125 |
| |
5 | Left hand end section, 51113 |
| |
NS | Section replacement kit (one per joint; 4 seals, 4 ball bearings, and sealant) | ||
6 | Burner, main |
| |
NS | Burner, main with pilot bracket |
| |
7 | Right hand/left hand base rail |
| |
8 | Base front panel: | ||
|
| ||
|
| ||
|
| ||
9 | Front base insulation: | ||
|
| ||
|
| ||
|
| ||
10 | Base access panel: | ||
|
| ||
|
| ||
|
| ||
11 | Manifold: | ||
|
| ||
|
| ||
|
| ||
12 | Base back panel: | ||
|
| ||
|
| ||
|
| ||
13 | Back base insulation: | ||
|
| ||
|
| ||
|
| ||
14 | Tie rod without nut (2 per boiler): | ||
|
| ||
|
| ||
|
| ||
15 | Flue baffle: | ||
|
| ||
|
| ||
|
| ||
16 | Flue baffle insulation: | ||
|
| ||
|
| ||
|
| ||
17 | Spill switch, |
| |
18 | Rollout thermal fuse element, |
| |
19 | Radiation shield (2 per joint) |
| |
20 | Section alignment ball bearings, 1/4” diameter (4 per joint) | ||
| Ball bearing kit (4 bearings) |
| |
NS | Main burner orifice (natural gas) #37 drill |
| |
NS | Main burner orifice (propane gas) 1.65 mm |
| |
20 | Part Number |
