Hazard Definitions
|
|
| Indicates a hazardous situ- |
! DANGER | |
| ation, which, if not avoided, |
|
will result in death or serious injury.
| Indicates a hazardous |
! WARNING | |
| situation, which, if not |
|
avoided, could result in death or serious injury.
Indicates a hazardous situation, which, if not
avoided, could result in minor or moderate injury.
Within the boundaries of the hazard warning, there will be information presented describing consequences if the warning is not heeded and instructions on how to avoid the hazard.
NOTICE Intended to bring special attention to information, but not related to personal injury or property damage.
General Information
!WARNING Owner’s Responsibility
Incorrect installation, adjustment, and use of this burner could result in severe personal injury, death, or sub- stantial property damage from fire,
carbon monoxide poisoning, soot or explosion.
Contact a professional, qualified service agency for the installation, adjustment and service of your oil heating system. This work requires technical training, trade ex- perience, licensing or certification in some states and the proper use of special combustion test instruments.
Please carefully read and comply with the following instructions:
yNever store or use gasoline or other flammable liquids or vapors near this burner or appliance.
yNever attempt to burn garbage or refuse in this appliance.
yNever attempt to light the burner/appliance by throwing burning material into the appliance.
yNever attempt to burn any fuel not specified and approved for use in this burner.
yNever restrict the air inlet openings to the burner or the combustion air ventilation openings in the room.
NOTICE This manual contains information that applies to both AF and AFG burners. These burners may appear to be basically identical, but there are differences in design and performance. Please review the comparison chart below:
Feature | AF | AFG |
Static Pressure Capability | Conventional - Low range | Enhanced - Medium range |
Blower Wheel Design | Standard strip | Special tablock |
|
|
|
Inlet Airflow Design | Standard inlet bell | Special airguide |
UL Air Tube Combinations | “F” Series ONLY | “F” or “M” Series |
Igniter Gaskets Baseplate/Barrier | Optional, as specified | Required, always specified |
Low Firing Rate Baffle | Not required | Required, per specification |
Figure 1. Burner label location
6104BAFG R06 | Page 3 |
