Manuals / Weil-McLain / Household Appliance / Burner

Weil-McLain UO-3 CV, UO-5 CV, UO-4 CV manual Oil Burner Manual, Af/Afg, Residential Burners

Models: UO-3 CV UO-4 CV UO-5 CV

1 25

Download 25 pages 23.74 Kb

Page 2

Image 2

AF/AFG

Oil Burner Manual

RESIDENTIAL BURNERS

Potential for Fire, Smoke and Asphyxiation Hazards

Incorrect installation, adjustment, or misuse of this burner could result in death, severe personal injury, or substantial property damage.

To the Homeowner or Equipment Owner:

yPlease read and carefully follow all instructions provided in this manual regarding your responsibilities in caring for your heating equipment.

yContact a professional, qualiﬁed service agency for installation, start-up or service work.

ySave this manual for future reference.

To the Professional, Qualif ed Installer or Service Agency:

yPlease read and carefully follow all instructions provided in this manual before installing, starting, or servicing this burner or heating system.

yThe Installation must be made in accordance with all state and local codes having jurisdiction.

6104BAFG R05	Page 1

Page 2

Image 2

Weil-McLain UO-3 CV, UO-5 CV, UO-4 CV manual Oil Burner Manual, Af/Afg, Residential Burners

Contents

R02 01/09 RESIDENTIAL BURNERS Oil Burner ManualAF/AFG Table of Contents Indicates a hazardous situ Hazard DeﬁnitionsGeneral Information ation, which, if not avoidedTable 1 - Burner Specif cations General Information To the OwnerWARNING Do NOT Alter the Original Burner Design Thank you for purchasing a Beckett burnerTable 2 - Air Tube Combination ATC codes WARNING ProfessionalRequired ServiceGeneral Speciﬁcations Notice Special RequirementsWARNING Fire, Smoke & Asphyxia tion Hazard Inspect/Prepare Installation SiteInspect Chimney or Direct Vent System Figure 2 - Chimney Design - Above the RoofAdequate Combustion Table 3. Chamber DimensionsCombustion air supply and Ventilation Air SupplyLow Firing Rate Bafﬂe installed Attach air tube if not already installedInstall burner nozzle if not already in- stalled Low Firing Rate Baff eFigure 3. - Electrode Tip Adjustment Check/adjust electrodesServicing nozzle line assembly Mounting dimensionsPrepare the Burner Check/Adjust ‘Z’ Dimension - ‘F’ headsBurner Dimensions For usable length A inchesTable for initial adjusting plate settings for Figure 6. Check/Adjust ‘Z’ Dimension - V1 HeadsSet head position adjusting plate V1 head only HeadWARNING Oil Leak and Fire Hazard Installing the Oil Tank and Supply SystemFigure 7. - Mounting Burner in Appliance CAUTION Do Not Use Tef on TapeSpecial wiring required with covered burners Wire burner Wire burnerBurner installed at jobsite Fuel line installationBurner Controls GeniSys Model 7505 Control WiringFeatures Fire or Explosion HazardMotor-offdelay Burner ControlsValve-ondelay Burner Controls Reset Button OperationTable 2 - Reset Button Operation Table 3 - Status LightsFigure 10. - Typical Burner Wiring Burner ControlsResetting From Restricted or Hard Lockout Wire burnerCad Cell Resistance Indicator Start up burner/set combustionStartup/Checkout Check Safety FeaturesStartup / Checkout Set combustion with instrumentsShutting the Burner Off Perform regular maintenanceWARNING Annual Professional Ser- vice Required Perform regular maintenancePerform regular maintenance Figure 12. Blower wheel assemblyReplace the blower wheel 21 23 Description DescriptionR.W. BECKETT CORPORATION R.W. BECKETT CORPORATIONWARRANTY Limited