SYMPTOM | POSSIBLE CAUSE | SUGGESTED REMEDY | |
|
|
| |
| Circuit breaker off or tripped | Reset circuit breaker | |
No power to warmer |
|
| |
Unit not plugged in | Make sure unit is plugged in to | ||
| |||
| power receptacle | ||
|
| ||
|
|
| |
| Temperature control not set | Set control to desired | |
| temperature | ||
Warmer will not heat |
| ||
|
| ||
Internal damage | Contact you Authorized Wells | ||
| |||
| Service Agency for repairs | ||
|
| ||
|
|
| |
| Wet insulation | Allow to dry or replace insulation | |
|
|
| |
Warmer trips circuit breaker | Pan leaking or other internal | Contact your Authorized Wells | |
damage | Service Agency for repairs | ||
| |||
|
|
| |
| Internal damage | Contact your Authorized Wells | |
| Service Agency for repairs | ||
|
| ||
|
|
| |
| Mineral deposits on pan acting | Clean pan(s) with delime cleaner | |
| as a insulator | ||
|
| ||
|
|
| |
Warmer slow to heat |
| Verify supply voltage - must | |
Connected to wrong voltage | match voltage on warmer | ||
|
| nameplate | |
| Too much water | Remove water from pan until 1” | |
| of water remains in pan | ||
|
| ||
|
|
|
There are no
In all instances of damage or malfunction, contact your Authorized Wells Service Agency for repairs.
002 p/n 303306 OpM CT Warmer_Inf. Sw.
8