NOTE: DO NOT discard the carton or other packing materials until you have inspected the appliance for hidden damage and tested it for proper operation.

Refer to SHIPPING DAMAGE CLAIM PROCEDURE on the inside front cover of this manual.

WARNING:

RISK OF INJURY

Installation procedures must be performed by a qualified technician with full knowledge of all applicable electrical and plumbing codes. Failure can result in personal injury and property damage.

CAUTION

FIRE HAZARD

Avoid storing flammable or combustible materials in, on or near the appliance.

CAUTION

SHOCK HAZARD

The ground prong of the electrical cord is part of a system designed to protect you from electrical shock. In the event of internal damage to the warmer. NEVER CUT OFF THE GROUND PRONG (large round prong). NEVER TWIST AND ELECTRICAL PRONG TO FIT AN EXISTING RECEPTACLE. Install an electrical circuit and/ or receptacle appropriate to the voltage/amperage requirements of the appliance.

IMPORTANT: Damage due to being plugged into wrong voltage is NOT covered by warranty.

UNPACKING & INSPECTION

Carefully remove the appliance from the carton. Remove all protective plastic film, packing materials and accessories from the Appliance before connecting electrical power or otherwise performing any installation procedure.

Carefully read all instructions in this manual and the Installation Instruction Sheet packed with the appliance before starting any installation.

Read and understand all labels and diagrams attached to the appliance.

Carefully account for all components and accessories before discarding packing materials. Store all accessories in a convenient place for later use.

SET-UP NOTES

1.Setup the appliance only on a firm, level, non-combustible surface. Verify local codes for requirements. Concrete, tile, terrazzo or metal surfaces are recommended. Metal over combustible material may not meet code for non-combustible surfaces.

2.Install one adjustable leg at each corner of the warmer by screwing the leg into the fitting on the bottom. With a spirit level, check that the appliance is level front-to-back and side- to-side. Verify that the unit sits firmly ON ALL FOUR LEGS.

3.The lower portions of the legs are adjustable by turning; adjust as required to level the appliance. All four legs must be adjusted to firmly contact the counter in order to prevent tipping.

4.Refer to the Installation Instruction Sheet for required clearances. Maintain required clearances between the appliance and adjacent combustible surfaces.

5.Avoid storing flammable or combustible materials in, on or near the appliance.

ELECTRICAL HOOK-UP

1.Refer to the nameplate. Verify the electrical service power. Voltage and phase must match the nameplate specifications. Plugging the warmer into the wrong voltage can severely damage the unit or cause noticeable decreased performance.

2.Your warmers is equipped with a grounded electrical cord. This cord must be plugging into a properly grounded electrical receptacle.

002 p/n 303306 OpM CT Warmer_Inf. Sw.

4

Page 5 Page 7
Page 6
Image 6
Wells SW-10 operation manual Risk of Injury, Fire Hazard, Unpacking & Inspection, SET-UP Notes, Electrical HOOK-UP
Page 5 Page 7

SW-10 specifications

The Wells SW-10 is a versatile and robust steam generator that has gained recognition in various industries due to its innovative features and advanced technologies. Designed for efficiency and reliability, the SW-10 stands out with its exceptional performance capabilities, making it a preferred choice for operators in need of consistent steam supply for heating, sterilization, cleaning, and other applications.

One of the key features of the Wells SW-10 is its impressive steam output. The unit is engineered to deliver stable and high-quality steam on demand, ensuring that processes requiring steam heat can be carried out without interruption. The steam generator has a compact design, making it suitable for installations in environments where space is limited, while still providing ample steam production capacity.

Equipped with cutting-edge control technologies, the Wells SW-10 offers intuitive operation and monitoring capabilities. Its user-friendly interface allows operators to easily set parameters for pressure and temperature, facilitating precise control over the steam generation process. This capability is essential in applications where specific steam characteristics are crucial for optimal results.

The SW-10 also features robust safety mechanisms that protect the unit and its users. This includes pressure relief valves, water level sensors, and thermal cutoffs, ensuring that the generator operates within safe parameters. These safety features not only enhance the reliability of the system but also contribute to reduced maintenance needs over time.

Another characteristic of the Wells SW-10 is its energy efficiency. The generator is designed to minimize energy consumption while maximizing steam output, making it an environmentally friendly option for businesses looking to reduce their carbon footprint. The incorporation of advanced insulation materials further enhances thermal efficiency by reducing heat loss.

Durability is yet another hallmark of the Wells SW-10, built from high-quality materials that withstand the rigors of continuous operation. This ensures a long lifespan, reducing the frequency and cost of replacements and repairs, an essential factor for companies aiming to maintain operational stability.

In summary, the Wells SW-10 steam generator is a highly efficient, compact, and reliable solution for industrial and commercial applications. Its combination of high steam output, advanced control technologies, robust safety features, energy efficiency, and durability makes it an essential tool for various industries that rely on steam for their operations.
Top Page Image Contents