CAUTION:
SHOCK HAZARD
Do NOT splash or pour water into or over any control panel or wiring.
CAUTION:
SHOCK HAZARD
Disconnect warmer from electric power before cleaning
CAUTION:
BURN HAZARD
Allow warmer to cool completely before cleaning.
CAUTION:
SHOCK HAZARD
DO NOT submerge warmer in water.
DAILY CLEANING INSTRUCTIONS
PREPARATIONS: Turn control knob(s) to OFF. Unplug the warmer. Allow warmer to cool before proceeding. Remove any insets, pans and/or adapter tops Drain or remove water from well if used for wet operation.
FREQUENCY: Minimum - daily.
TOOLS: Mild Detergent
Solution: 10 Parts Warm Water to 4 Parts Vinegar
Plastic Scouring Pad Clean Cloth or Sponge
1.Wipe entire unit down using a clean cloth or sponge and mild detergent.
2.Use a plastic scouring pad to remove any hardened food particles or mineral deposits.
IMPORTANT: DO NOT use steel wool for cleaning.
3.Rinse warmer thoroughly with a vinegar and water solution to neutralize all detergent cleanser residue.
4.Inspect warmer tank for damage. Damage to the outer body may allow grease and water to leak into insulation and heating element, causing a potential fire and/or electric shock hazard. Contact your Authorized Wells Service Agency to inspect the warmer if you suspect water or grease contamination.
5.Add proper amount of warm water. Reconnect warmer to electric power. Turn control knob ON and check for proper operation.
002 p/n 303306 OpM CT Warmer_Inf. Sw.
6
