CLEANING INSTRUCTIONS
CAUTION!
Personal Injury
Hazard
Disconnect power from hood and conveyor warmer before cleaning.
IMPORTANT: DO NOT spill or pour water into controls, control panel or wiring.
DO NOT spill or pour water into exhaust opening.
DO NOT submerge hood in water or wash with water or steam spray. Damage to internal components will occur.
Damage to internal components from water damage is not covered by warranty.
PREPARATION | Unplug hood and conveyor warmer |
| Allow to cool completely before cleaning |
FREQUENCY | Daily |
TOOLS | Mild Detergent |
| Soft Cloth or Sponge |
1.Disconnect power from hood and conveyor warmer before cleaning.
2.Remove entry and exit canopies. Canopies may be washed in a sink or dishwasher. Rinse and dry canopies thoroughly.
3.Wipe interior and exterior surfaces of hood with a soft cloth or sponge dampened with water and a mild detergent.
IMPORTANT:
Never attempt to wash either filter.
Filters will absorb water if washed, causing food contamination and possible equipment damage.
4.Rinse all washed areas by wiping with a clean soft cloth dampened with clean water. Dry with a soft cloth.
5.Reinstall entry and exit canopies.
Procedure is complete
8
