![](/images/new-backgrounds/1065464/654649x1.webp)
| FEATURES & OPERATING CONTROLS (continued) |
|
|
ITEM | DESCRIPTION |
CANOPY | Removable canopies aid in vapor capture at entry and exit of the conveyor |
| warmer. Canopies hang from mounting pins at each end of the hood. |
ELECTRICAL | The hood plugs into a NEMA |
| with a 6' power cord. An illuminated power switch on the front panel is used |
| to start/stop the hood fan. |
EXHAUST | The hood uses an exhaust fan to provide air movement. The fan exhausts |
| through a screened opening in the top of the hood. |
| IMPORTANT: DO NOT block exhaust opening. |
FILTERS | The hood uses two filters. A high efficiency filter is used to capture |
| particulate emissions. |
| A charcoal filter is used to help control odors. |
| Filters are accessed by opening a hinged panel on the front (operator's) |
| side of the hood. |
| Filter operation is monitored by a vacuum switch. When the filter(s) |
| become loaded to the point of being unable to remove particulates, a front |
| panel "change filters" indicator will glow. |
NAMEPLATE | Provides Manufacturer, Model and Serial Number information. |
| Also, provides electrical ratings. |
TOP PANEL | CAUTION! |
| Electric Shock Hazard |
| Exposed Electric Circuits |
| Top panel must be opened ONLY by qualified personnel. |
| Allows access to interior components. |
| DO NOT stack anything on top of the hood. |
AGENCY LISTING INFORMATION
This appliance conforms to NSF Standard 4 for sanitation only if installed and maintained according to the instructions in this manual.
This appliance is U Listed for 120V and 208 - 240V. This appliance is V Listed for 120V and 208 - 240V.
IMPORTANT: For use with conveyor warmer of 9,000 watts maximum.
NOTE: This ductless hood has not been evaluated to the requirements of NFPA 96.
Local jurisdictions may require additional evaluations for installation of this product.
STD 4
3