UNPACKING & INSPECTION
Carefully read all instructions in this manual before starting any installation.
Carefully remove the hood from the carton.
IMPORTANT: Appliance weighs 92 lbs (42.7 kg). Use appropriate care when removing from carton and installing on conveyor warmer.
Remove all protective plastic film, packing materials and accessories from the hood before connecting electrical power or otherwise performing any installation procedure.
Read and understand all labels and diagrams attached to the hood.
Carefully account for all components and accessories before discarding packing materials. Store all accessories in a convenient place for later use.
COMPONENTS:
HIGH EFFICIENCY FILTER CHARCOAL FILTER
COMPONENTS SHIPPED SEPARATELY CANOPY (2 ea)
ADAPTER TOP
SETUP
The
Fig. 2 Hood installation on warmer
Check high efficiency filter and charcoal filter for proper installation. Charcoal filter slides into clips on the high efficiency filter. Airflow marks must point "up".
Attach entry and exit canopies to pins on sides of hood. Canopies are interchangeable and may be mounted at either end.
Maintain required clearances of at least 6" between the appliance and adjacent combustible surfaces.
INSTALLATION
NOTE: DO NOT discard the carton or other packing materials until you have inspected the hood for hidden damage and tested it for proper operation.
Refer to SHIPPING DAMAGE CLAIM PROCEDURE on the inside front cover of this manual.
WARNING!
Risk of Personal Injury
Installation procedures must be performed by a qualified technician with full knowledge of all applicable electrical codes. Failure can result in personal injury and property damage.
CAUTION!
Risk of
Personal Injury
and Property
Damage
Unplug conveyor warmer and allow to cool before beginning installation.
IMPORTANT:
Maintain required clearances of at least 6" between the appliance and adjacent combustible surfaces.
Avoid storing flammable or combustible materials in, on or near the appliance.
5
