INSTALLATION (continued)
WARNING!
Electric
Shock hazard
All servicing requiring access to
DO NOT open any access panel which requires the use of tools. Failure to follow this warning can result in severe electrical shock.
CAUTION!
Electrical Shock
Hazard
The ground prong of the power cord is part of a system designed to protect you against electric shock in the event of internal damage. DO NOT cut the ground prong (large round prong) or twist a blade to make the plug fit an existing receptacle.
IMPORTANT:
Contact a licensed electrician to install and connect electrical power to the appliance.
IMPORTANT: Damage due to being connected to the wrong voltage or phase is NOT covered by warranty.
ELECTRICAL INSTALLATION
Refer to the nameplate. Verify the electrical power source. Voltage and phase must match the nameplate specifications. Plugging the hood into the wrong voltage can severely damage the unit .
Your hood is equipped with a grounded electrical cord. This cord must be plugged into a properly grounded NEMA
Fig. 3 Electrical Plug and Receptacle Configuration
6
