ATTACHING THE LAT TOWER

For some exercises, the Lat Tower (40) needs to be attached to the weight bench. To do this, remove the 38mm Square Inner Cap (21) from the Front Leg (8). Insert the Lat Tower into the Front Leg and align the indicated hole in the Lat Tower with the adjustment hole in the Front Leg. Secure the Lat Tower with the Adjustment Knob (31).

Note: When the Lat Tower (40) is not being used, it should be stored away from the weight bench, and the 38mm Square Inner Cap (21) should be inserted into the Front Leg (8).

WARNING: When you are using the Lat Tower (40), place a barbell (not included) with the same amount of weight on the weight rests to balance the bench.

ATTACHING THE LAT BAR

Attach the Lat Bar (37) to the Cable (39) with a Cable Clip (41). Rest the Lat Bar on the lat bar rest on the Lat Tower (40).

40

21

Hole

Adjustment

Hole

31

8

39

41

37

Lat Bar

Rest

40

11

Page 11
Image 11
Weslo WEBE13810 user manual Attaching the LAT Tower, Attaching the LAT BAR