3.Attach the Frame (2) to the Crossbar (3) with two M8 x 57mm Bolts (18), two M8 Washers (16), and two M8 Nylon Locknuts (17). Note: Do not tighten the Nylon Locknuts yet.
4.Tap a 30mm Square Inner Cap (22) into each end of the Leg Lever (4).
Tap a 1” Round Inner Cap (24) into the indicated end of the weight tube on the Leg Lever (4). Tap the 1” Round Angled Cap (20) onto the other end of the weight tube.
5.Lubricate the M10 x 60mm Bolt (32). Attach the Leg Lever (4) to the bracket on the Front Leg (8) with the Bolt and an M10 Nylon Locknut (33).
6.Tap two 3/4” Round Inner Caps (9) into each Long Pad Tube (10). Insert the Pad Tubes through the holes in the Leg Lever (4). Slide two Long Foam Pads (23) onto each Pad Tube.
3 |
|
|
|
|
| 16 | 17 |
| 18 |
|
|
|
|
| 3 |
| 2 | 18 |
|
4 |
|
|
|
| 22 |
| 4 |
|
|
| |
|
|
| 20 |
| 24 |
|
|
| Weight Tube | 22 | |
5 | 32 | Lubricate | |
| 4 |
|
|
|
|
| 33 |
|
|
| 8 |
6 | 4 |
|
|
23 |
|
|
|
|
|
| 9 |
|
|
| 10 |
|
|
| 9 |
|
|
| 10 |
|
|
| 23 |
7
