4.Attach the Handlebar (5) to the Handlebar Post (14) with two M10 x 25mm Button Screws (8) and two M10 Split Washers (31).
5.Press the Side Shield Cover (30) into the Right and Left Side Shields (1, 2). Make sure the four Tabs (A) on the Side Shield Cover are securely fastened to the Side Shields.
Insert the Seat Post (20) into the Frame (15). Make sure that the Seat Post Bushing (23) is fully seated in the Frame. Align one of the holes in the Seat Post with the hole in the Frame. Insert the Seat Knob (29) into the Frame and the Seat Post, and tighten the Seat Knob into the Frame. Make sure to insert the Seat Knob through one of the holes in the Seat Post; do not insert the Seat Knob under the Seat Post.
Attach the Seat (19) to the Seat Post (20) with four M8 Nylon Locknuts (21) and four M8 Split Washers (53). Note: The Nylon Locknuts and Split Washers may be
6.Identify the Left Pedal (28) (there is an “L” on the Left Pedal for identification). Using an adjustable wrench, tighten the Left Pedal counterclockwise into the left arm of the Crank (17).
Tighten the Right Pedal (not shown) clockwise into the right arm of the Crank (17).
Adjust the Left Pedal Strap (45) to the desired posi- tion. Press the Pedal Strap onto the indicated adjustment tab. Do the same with the Right Pedal Strap (not shown).
4 |
|
8 | 31 |
| |
5 | 14 |
| |
5 | 19 |
| |
| 53 |
| 53 |
| 21 |
| 21 |
| 20 |
30 |
|
| 23 |
| 29 |
| A |
| 15 |
| 2 |
| 1 |
6 |
|
| 17 |
45 |
|
| 28 |
Adjustment |
|
Tab |
|
7
