![](/images/new-backgrounds/1144712/1447129x1.webp)
ASSEMBLY
Assembly requires two persons. Set the treadmill in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench
and your own phillips screwdriver , adjustable wrench
, and wire
cutters .
Note: The underside of the treadmill walking belt is coated with
| Handrail Bolt | |
Washer |
|
|
|
| Screw |
Handrail Nut | Extension Leg | Short Handrail Bolt |
Screw |
1.With the help of a second person, carefully raise the Uprights (11) until the treadmill is in the position shown.
Cut the tie from the right Upright (11).
2.Insert one of the Extension Legs (34) into the treadmill as shown. (Note: It may be helpful to tip the Uprights
[11] in the direction shown by the arrow as you insert the Extension Leg.) Make sure that the Base Pad (40) is on the indicated side of the Extension Leg. Attach the Extension Leg with an Extension Leg Screw (53). Make sure to push on the head of the Extension Leg Screw while tightening it.
Attach the other Extension Leg (not shown) in the same way.
1 |
Tie |
11 |
2 |
11 |
53 |
34 |
40 |
5